•
Default:
None (blank)
[OSD] - [Position]
Select the position where the time and date and a character string to be displayed on the image of the “Live”
page.
•
Upper left:
The above information will be displayed at the upper left corner of the main area on the
“Live” page.
•
Lower left:
The above information will be displayed at the lower left corner of the main area on the
“Live” page.
•
Upper right:
The above information will be displayed at the upper right corner of the main area on the
“Live” page.
•
Lower right:
The above information will be displayed at the lower right corner of the main area on the
“Live” page.
•
Default:
Upper left
[Indicator]
Determine whether or not to use the live indicator (POWER).
•
On:
The indicator lights up or blinks in the following manner when the power is turned on.
When the power is turned on
Lights green
When connected to a network (not accessed)
Lights orange
When connected to a network (accessed)
Blinks orange/Blinks green
•
Off:
The indicator is turned off at all times.
•
Default:
On
[Alarm status update mode]
Select an interval of the unit status notification from the following.
When the status of the unit changes, the alarm occurrence indication button will be displayed to notify of the
unit status.
•
Polling(30s):
Updates the status each 30 seconds and provide notification of the unit status.
•
Real time:
Provide notification of the unit status when the status has changed.
•
Default:
Real time
Note
•
Depending on the network environment, notification may not be provided in real time.
•
When multiple cameras are using the same “Alarm status reception port”, even if “Real time” is selected
for “Alarm status update mode”, status notification is not provided in real time. In this case, change the
“Alarm status reception port” settings.
[Alarm status reception port]
When selecting “Real time” for “Alarm status update mode”, designate a port number to which the status change
notification is to be sent.
•
Available port number:
1 - 65535
•
Default:
31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Automatic installation of viewer software]
Determine whether or not to install the viewer software from this unit.
•
On:
Installs the viewer software from the unit automatically.
•
Off:
The viewer software cannot be installed from the unit.
Operating Instructions
29
7 Configure the basic settings of the unit [Basic]
