13.6 Configure the settings relating to the FTP
periodic image transmission [FTP img. trans.]
Click the [FTP img. trans.] tab on the “Network” page. (
®
page 21, page 23)
The settings relating to the periodic transmission of images to an FTP server can be configured on this page.
To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in
advance (
®
page 62). Refer to page 100 for descriptions of how to configure schedules of image transmission.
IMPORTANT
•
When “D1” is selected for “Picture (Camera) mode”, the FTP periodic image transmission will not be
possible.
•
Depending on the network line speed or the network traffic, images may not be transmitted at the exact
designated interval or period.
•
When “On” is selected for both of the alarm image transmission function and the FTP periodic image
transmission function, the alarm image transmission function will be given priority over the FTP periodic
image transmission function. For this reason, images may not be transmitted at the exact designated
interval or period if alarms occur frequently.
FTP periodic image transmission
[FTP >>]
When “FTP >>” is clicked, the [FTP] tab of the “Server” page will be displayed. (
®
page 62)
[FTP periodic image transmission]
Select “On” or “Off” to determine whether or not to transmit images using the FTP periodic image transmission
function.
When “On” is selected, it is necessary to configure the settings of the FTP server. (
®
page 62)
•
Default:
Off
[Directory name]
Enter the directory name where the images are to be saved.
For example, enter “/img” to designate the directory “img” under the root directory of the FTP server.
•
Available number of characters:
1 - 256 characters
•
Unavailable characters:
" & ;
•
Default:
None (blank)
Operating Instructions
99
13 Configuring the network settings [Network]
