•
While a camera controlled via RS485 communication is executing a patrol function, it is impossible
to start another one. Stop the current patrol function before starting a new one.
•
To activate auto pan, sort, preset position sequence or patrol 1-4, it is required to perform the
settings on the setup menu of camera in advance. (
®
page 40)
Control pad/buttons
*2
•
Left-click on the control pad or buttons to adjust the horizontal/vertical position of the camera (panning/
tilting). Panning/tilting speed will be faster if a clicked point gets farther from the center point of the
control pad.
It is also possible to pan/tilt the camera by dragging the mouse.
Zoom and focus can be adjusted by right-clicking. When an upper/lower area of the control pad is
right-clicked, the displayed image will be zoomed in/out on. When a left/right area is right-clicked, the
focus will be adjusted to the Near/Far side.
Zoom can also be adjusted using the mouse wheel.
[Brightness] buttons
*2
•
button:
Image become darker.
•
button:
The adjusted brightness will return to the default brightness.
•
button:
Image become brighter.
[Preset]
*2
Select a preset position from the pull-down menu and click the [Go] button. The camera will move to the
selected preset position. When “Home position” is selected, the camera will move to the home position.
Preset positions and the home position can be registered in the camera's setup menu. (
®
page 40)
Unit title
The title entered for “Unit title” on the [Basic] tab will be displayed. (
®
page 27)
Alarm occurrence indication button
*2
This button will be displayed and will blink when an alarm has occurred. When this button is clicked, this
button will disappear. (
®
page 18)
Full screen button
Images will be displayed on a full screen. To return to the “Live” page, press the [Esc] key. The aspect ratio
of displayed images will be adjusted in accordance with the monitor.
Snap shot button
Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-up menu will be displayed. It is possible to save the
image on the PC by selecting “Save” from the displayed pop-up menu.
When “Print” is selected, printer output is enabled.
Note
•
For the case of using Windows 7 or Windows Vista, the following settings may be required.
Open Internet Explorer, click [Tools]
®
[Internet Options]
®
[Security]
®
[Trusted Sites]
®
[Sites]. Register the unit address on [Website] of the displayed trusted widows.
Main area
Images from the camera will be displayed in this area.
The current time and date will be displayed according to the settings configured for “Time display format”
and “Date/time display format”. (
®
page 27)
When clicking a desired point while displaying live images in the main area, the camera will move to locate
the clicked point at the center of the main area.
Note
•
When operated by a lower access level user, images displayed on the screen may be changed
temporarily. This does not affect operation of the unit.
•
Depending on the PC in use, screen tearing* may occur when the shooing scene drastically changes
due to the GDI restrictions of the OS.
Operating Instructions
11
1 Monitor images on a PC
