Panasonic WH-MHF09G3E8, Руководство по обслуживанию

Страница: 16 / 140

16
User
Checking the temperature range
1 Press and hold for 5 seconds to enter the temperature range setting mode.
2 Press or to select a menu.
• Press to exit.
24 °C 5 °C ~ 35 °C
0 °C -15 °C ~ 20 °C
52 °C 40 °C ~ 75 °C
55 °C
35 °C
25 °C ~ 65 °C
25 °C ~ 65 °C
-5 °C -15 °C ~ 15 °C
15 °C -15 °C ~ 15 °C
Dealer
Operation/settings to be done only by the authorised dealer/specialist.
User
Operation/settings to be done by the authorised dealer/specialist or user.
Dealer
System temperature setting
Temperature setting Display
The system controls the temperature for each menu based on the
outdoor ambient temperature.
• To set or change the temperatures, make sure to contact your
nearest authorised dealer.
1
Press and hold for 5 seconds to enter the
temperature range setting mode.
(The display shows SETTING.)
2 Press or to select a menu.
3 Press to enter the menu.
4 Press or to set the desired temperature.
5 Press to confirm the setting.
• Repeat steps 2 to 5 to set other menus.
Menu
Default
setting
Temperature
setting
Display
Setting of low outdoor ambient temperature.
HEAT
Setting of high outdoor ambient temperature.
Setting of water outlet temperature at low outdoor
ambient temperature.
Setting of water outlet temperature at high outdoor
ambient temperature.
During HEAT mode, the water
outlet temperature is adjusted as
is shown the diagram on the right.
It is performed within the preset
temperature range.
<Water outlet
temperature>
<Outdoor ambient temperature>
max. water temp.
min. water temp.
Setting of outdoor ambient temperature to turn
OFF heating operation during HEAT mode.
HEAT
Setting of outdoor ambient temperature to turn ON
the backup heater.
HEATER
Setting of sanitary water tank temperature.
TANK