Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 163 / 233

163
Available commands are listed below.
P Set the port number.
Press "P." The command prompt changes to "Enter port number>." Enter the port
number you wish to configure.
C Set the operation mode for authentication requests.
Press "C." The command prompt changes to "Select authenticator port control
(A/U/F) >." Press "A" to enable the authentication function. Press "U" to disable it
and block communi- cations. Press "F" to disable it and authorize communications.
T Set the interval time for authentication requests.
Press "T." The command prompt changes to "Enter Transmission Period>." Enter an
integer between 1 and 65535 (seconds).
U Set the period time to wait before reattempting a failed authentication.
Press "U." The command prompt changes to "Enter Quiet Period>." Enter an integer
between 1 and 65535 (seconds).
M Set the maximum number of reattempts of authentication.
Press "M." The command prompt changes to "Enter Max request count>." Enter the
maxi- mum number of reattempts with an integer between 1 and 10.
O Set the timeout for the authentication server.
Press "O." The command prompt changes to "Enter Server Timeout>." Enter an
integer between 1 and 65535 (seconds).
L Set the timeout for the supplicant.
Press "L." The command prompt changes to "Enter Supplicant Timeout value>."
Enter an integer between 1 and 65535 (seconds).
E Set the re-authentication time interval.
Press "E." The command prompt changes to "Enter re-authentication Period>."
Enter an inte- ger between 1 and 65535 (seconds).
A Enable/disable re-authentication.
Press "A." The command prompt changes to "Enable or Disable
re-authentication ?(E/L/D) >." Press "E" to enable the authentication using the
Re-authentication timer value on the RADIUS server. Press "L" to enable the
authentication using the Re-authentication timer value on this switch. Press "D" to
disable it.
I Initialize the authentication status.
Press "I." The command prompt changes to "Would you initialize
authenticator?(Y/N)>." To initialize it, press "Y." Otherwise, press "N."
R Initialize the re-authentication status.
Press "R." The command prompt changes to "Would you want to initialize
re-authentica- tion?(Y/N) >." To initialize it, press "Y." Otherwise, press "N."
Q Return to the previous menu.