Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 167 / 233

167
4.7.7.a. Loop History Information
On the Loop Detection Configuration Menu, pressing "I" opens the Loop
History Information screen, as shown in Fig. 4-7-27. On this screen, the date
and time of detecting loop and the event information are listed.
Fig. 4-7-27 Loop History Information
Screen Description
Available commands are listed below.
N Show the next page.
Press "N." The screen shows the next page.
P Show the previous page.
Press "P." The screen shows the previous page.
C Delete the history information in the loop history function.
Q Return to the previous menu.
Entry Shows the event number.
Time Shows the time when the event occurred. If the time is not set, the accumulated
running time since boot is shown.
Event Shows the description of the event occurred to the Switching Hub.
The loop detected on
portX.
Indicates that a loop was detected in a Switching
Hub under port X, and the connection has been
shut down.
The loop detected
between portX and portY. Indicates that a loop was detected between port
X and port Y, and the connection has been shut
down.
PortX auto recovery. Indicates that the port X is automatically
recovered from being shut down.
PN28480K Local Management System
Loop Detection Configuration Menu -> Loop History Information
Entry Time(YYYY/MM/DD HH:MM:SS) Event
----- ------------------------- -------------------------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[C]lear Loop Detection history
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option