Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 197 / 233

197
Available commands are listed below.
I Set the IP address of the target of the ping.
Press "I." The command prompt changes to "Enter new Target IP Address >." Enter
the IP address.
N Set the number of times of ping.
Press "N." The command prompt changes to "Enter new Request Times>." Enter
the number of times. Ping can be executed up to 10 times. Enter the number of
times between 1 and 10.
T Set the time before timeout occurs.
Press "T." The command prompt changes to "Enter new Timeout Value>." Set the
time in seconds. Up to 5 seconds can be set. Enter the time between 1 to 5
seconds.
E Execute the ping command. Or, clear the display.
Press "E." The command prompt changes to "Execute Ping or Clean before Ping
Data (E/C)>." Press "E" to execute ping. Press "C" to only clear the display.
S Cancel the ping command.
Press "S" or "Ctrl+C" during the ping execution to cancel it.
Q Return to the previous menu.
Fig. 4-9-9 Display during IPv4 Ping Execution
PN28480K Local Management System
Ping Execution -> IPv4 Ping Execution
Target IP Address: 192.168.0.100
Number of Requests: 10
Timeout Value: 3 Sec.
=============== Result ===============
No. 1 < 10 ms
No. 2 < 10 ms
No. 3 < 10 ms
No. 4 < 10 ms
No. 5 < 10 ms
Waiting for response...
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address [E]xecute Ping
Set [N]umber of Requests [S]top Ping
Set [T]imeout Value [Q]uit to previous menu
>
S or Ctrl-C Stop ping function