Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 161 / 233

161
4.7.7 802.1X Port Based Access Control
On the Advanced Switch Configuration Menu, pressing "X" opens the
802.1X Port Based Access Control Configuration Menu, as shown in Fig.
4-7-25. You can set the 802.1X Port Based Access control. The supported
authentication method is EAP-MD5, TLS, and PEAP.
Fig. 4-7-25 802.1X Port Based Access Control Configuration Menu
Screen Description
NAS ID: Shows the authentication ID (NAS Identifier).
Port No: Shows the port number.
Port Status Reflects the Port Control setting shown below..
Unauthorized
The port status is not authorized.
Authorized The port status is authorized.
Port Control Shows the operation mode for authentication requests.
Auto
The access control function is enabled. The
authentica- tion process relay is performed
between the client and the authentication server.
Force
Unauthorized The access control function is disabled. All
communica- tions are blocked.
Force Authorized The access control function is disabled. All
communica- tions are authorized. (Factory default
setting)
Transmission
Period The number of seconds to wait before requesting the client to reattempt
authentication.
The factory default setting is 30 seconds.
PN28480K Local Management System
Advanced Switch Configuration -> Port Based Access Control Configuration Menu
NAS ID : Nas1
Port No : 1
Port Status : Authorized
Port Control : Force Authorized
Transmission Period : 30 seconds
Supplicant Timeout : 30 seconds
Server Timeout : 30 seconds
Maximum Request : 2
Quiet Period : 60 seconds
Re-authentication Period : 3600 seconds
Re-authentication Status : Disable
-------------------------------- <COMMAND> -----------------------------------
[P]ort No Q[u]iet Period
Port [C]ontrol R[e]-auth Period
[T]ransmission Period Re-[a]uth Status
Supp[l]icant Timeout [I]nitialize
Server Time[o]ut [R]e-auth Initialize
[M]aximum Request [Q]uit to previous menu
Command>
Enter the character in square brackets to select option