Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 111 / 233

111
Available commands are listed below.
N Show the next page.
Press "N." The screen shows the next page.
P Show the previous page.
Press "P." The screen shows the previous page.
T Set the age-out time of ARP table.
Press "T." The command prompt changes to "Enter ARP age timeout value >." Enter
the age-out time of ARP table with a value of 30 to 86400 (seconds).
S Select the order of displaying ARP table.
Press "S." The command prompt changes to "Select method for sorting entry to
display (I/T)>." Press "I" to display in the order of IP address. Press "T" to display in
the order of type. If "T" is selected, the command prompt changes to "Select type
for sorting entry to display (S/D)>." Press "S" to display manually-set addresses. Press
"D" to display auto-leaned addresses.
A Add/modify an entry of ARP table.
Press "A." The command prompt changes to "Enter IP address>." Enter an IP
address. Then, the command prompt changes to "Enter Hardware address>." Enter
a MAC address as "**:**:**:**:**:**".
D Delete an entry of ARP table.
Press "D." The command prompt changes to "Enter IP address>." Enter an IP
address.
Q Return to the previous menu.