Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 172 / 233

172
Available commands are listed below.
G Set a port group ID.
Press "G." The command prompt changes to "Enter Port Group ID>." Enter a port
group ID.
N Set a port group name.
Press "N." The command prompt changes to "Enter Port Group name>." Enter a port
group name in 16 one-byte characters or less.
P Set a port group member.
Press "P." The command prompt changes to "Enter egress port number>." Enter a port
number you wish to set. When entering multiple port numbers, delimit with comma
with no space, or hyphenate the continuous numbers.
A Create a port group.
Press "A" to apply the setting.
Q Return to the previous menu.
Note: After setting a port group, make sure to press "A" to apply the setting.
If you press "Q" without pressing "A", the setting will be discarded and
the port group will not be created.