Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 92 / 233

92
4.6.7.c. RADIUS Configuration
On the System Security Configuration Menu, pressing "R" opens the RADIUS
Configuration screen, as shown in Fig. 4-6-27. On this screen, you can
configure access setting to RADIUS server that is used in login
authentication.
Fig. 4-6-27 RADIUS Configuration
Screen Description
NAS ID: Shows the authentication ID (NAS Identifier).
Server IP
Address: Shows the IP address of RADIUS server. 0.0.0.0 is displayed because no
address is set on shipment.
Shared Secret: Shows the common key (Shared Secret) that is used in authentication.
The same key must be set between the server side and the client side. In
general, the system manager sets this common key. No common key is
set at shipment.
Response Time: Shows the maximum response time for authentication request to
RADIUS server. The factory default setting is 10 seconds.
Max
Retransmission: Shows the number of retransmission times for authentication request to
RADIUS server. The factory default setting is 3 times.
PN28480K Local Management System
System Security Configuration -> RADIUS Configuration Menu
NAS ID: Nas1
Index Server IP address Shared Secret Response Time Max Retransmission
----- ----------------- -------------------- ------------- ------------------
1 0.0.0.0 10 seconds 3
2 0.0.0.0 10 seconds 3
3 0.0.0.0 10 seconds 3
4 0.0.0.0 10 seconds 3
5 0.0.0.0 10 seconds 3
-------------------------------- <COMMAND> -----------------------------------
Set [N]AS ID
Set Server [I]P
Set Shared Se[c]ret
Set [E]ncrtpted Shared Secret
Set [R]esponse Time
Set [M]ax Retransmission
Set Server I[P]v6
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option