Panasonic Switch-M48eG, Руководство по эксплуатации

Страница: 129 / 233

129
Screen Description
Monitoring Port Shows the destination port number of data to be monitored.
Be Monitored
Port(s) Shows the target port number to be monitored.
Direction Shows the communication direction of target packet to be
monitored.
Tx
Monitors a transmit packet.
Rx Monitors a receive packet.
Both Monitors both transmit and receive packets. (Factory
default setting)
Status Shows the status of port monitoring.
Enabled
Port monitoring is enabled.
Disabled Port monitoring is disabled. (Factory default setting)
Available commands are listed below.
S Set a destination port of data to be monitored (port to which analyzer, etc. is
connected).
Press "S." The command prompt changes to "Enter port number>." Enter a target
port number.
M Set a port to be monitored.
Press "M." The command prompt changes to "Enter port number>." Enter a target
port number.
When entering multiple port numbers, delimit with comma with no space, or
hyphenate the continuous numbers.
D Set a communication direction of target packet to be monitored.
Press "D." The command prompt changes to "Select port monitoring direction
(R/T/B)>." Enter "R" to monitor a receive packet. Enter "T" to monitor a transmit
packet. Enter "B" to monitor both receive and transmit packets.
C Set the status of port monitoring.
Press "C." The command prompt changes to "Enter the select(E/D)>." Enter "E" to
start monitoring. Enter "D" to stop monitoring.
Q Return to the previous menu.