Panasonic S-ICX Скачать руководство пользователя страница 237

Страница: 237 / 327

Section 700 - Operation

Chapter 6. DSLT Features

S-ICX-50-700

S-ICX (International) issued October 2000

237

•

1 extension and 2 trunks

When the optional 8-party conference card is installed, the System supports any combination of
conference calls, except all outside lines.

Operation

To establish a conference call:

To establish a two-party private conversation from a 3-party conference:

To remove a Busy Tone (Hang up) from an 8-party conference:

Hardware Requirements

•

A Conference Card (VB-44120) must be installed in the System in order to conference more than
three parties.

Action

Result

1. While on a call, press the

HOLD

key or the line key of your

current call.

2. If adding an outside party, dial a trunk access code.

• Outside dial tone

3. Dial the number of the party you wish to add to the call.

4. Press the

CONF

key when your call is answered.

5. To add additional parties, repeat steps 1-4

6. To drop out of the conference call, hang up.

Action

Result

1. While on a call, press the

CONF + 1 (2)

to have a private

conversation with the CNF 1 (2) party.

You and the selected party are in a sepa-
rate conversation from the other confer-
ence parties.

2. To reestablish the conference, press the

CONF

key.

Action

Result

1. During an conference with more than 3 parties, press

CONF + (n) (

where

is the number 1-8 for the conference

parties)

to individually select a conference party.

The other party is placed on hold.

2. If you did not select the conference party that is giving busy

tone, re-enter the conference by pressing the

CONF

key.

3. If you selected the conference party that is giving busy tone,

hang up and then go off-hook again and press the

CONF

key to re-enter the conference call.

Содержание S-ICX








































































































































































































































































































































Результаты поиска

Содержание S-ICX

Отзывы:

Похожие инструкции для S-ICX

Бренды по названию

Популярные бренды

Panasonic S-ICX, Техническое руководство

Результаты поиска

Содержание S-ICX

Отзывы:

Похожие инструкции для S-ICX

Бренды по названию

Популярные бренды