Panasonic S-ICX, Техническое руководство

Страница: 160 / 327

160 S-ICX (International) issued October 2000 S-ICX-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
Hardware Requirements
• N/A
Considerations
• If a new code is programmed into a key, the previously programmed code is erased.
• FF keys assigned as trunks must be cleared using system programming before new FF
assignments can be made.
• The System can be programmed so that MCO 1 Trunk Access calls automatically use Automatic
Route Selection (ARS).
• The ANSWER key functions as listed in the table below.
• The RELEASE key functions as listed in the table below.
Table 18. Feature access codes for FF key assignments
Note: TMI is the abbreviation for Taiwan, Malaysia, Indonesia.
Status Condition Operation when ANSWER key is pressed
Idle No incoming ring Ignore.
Incoming ring Monitor ON (speaker) - Auto Answer for incoming ring.
Off-Hook Off-hook signaling Answer for off-hook signaling. Current conversation will be
put on hold automatically.
No off-hook signaling Ignore.
Note : When the extension has 1 non-appearing trunk on hold and 1 non-appearing trunk at talk, ANSWER key
operation is ignored and you can’t put the 2nd non-appearing trunk on hold.
Status Condition Operation when RELEASE key is pressed
Idle -- Ignore.
Monitor ON
(speaker) or Headset
Mode Several held calls Latest held call will be transferred; phone returns to idle sta-
tus (Monitor OFF).
No held calls Current call (talk) will be released; phone returns to idle sta-
tus (Monitor OFF).
Handset Off-Hook Several held calls Latest held call will be transferred; phone gets internal dial
tone.
No held calls Current call (talk) will be released; phone gets internal dial
tone.
Feature Description
Fixed Feature
Code + (additional digits to
program into key)
Default Flexible Feature Code
(if not listed, must use Fixed Feature
Code)
Trunk Key # + (Trunk 1-96)
MCO Key
1 + (Auto-Select Pattern 1-5;
MCO-Incoming Trk Grp 00-99)