manualshive.com logo in svg

Panasonic S-160PE1R5A, Технические данные и руководство по обслуживанию

Panasonic S-160PE1R5A - высококачественный продукт от Panasonic, который требует правильного обслуживания. Скачайте технические данные и сервисный мануал абсолютно бесплатно на manualshive.com. Этот мануал поможет вам правильно ухаживать за вашим устройством и продлить его срок службы.

Поделиться
Скачать
background image

8

8

Change the batteries when the display of the remote controller gets weak or if it will 

not work unless close to the receiver. 

(Alkaline batteries generally last about one year.) 

Reset hole

Cover

When changing batteries, always use two fresh batteries of the same make.

If the remote controller will not be used for a long period of time, remove the batteries.

Please dispose of batteries appropriately.

After changing the batteries, follow the procedures on the next page to reset the 

current time.

2

1,4

3

 

1.  Remove the cover.

2.  Insert two LR03 size batteries.

Put the batteries in with the polarity [+/–] as shown in the figure.

 

3.  Gently insert one end of an unfolded paper clip (or a similar object that can 

fit) into the Reset hole and press the Reset button inside the hole, then put 

the cover back on.

8-2. Installing Batteries

 

 

3. Remove the other battery in the same way.

1.  Remove the cover.

2.  Press the battery toward the negative end and lift it out by its positive end. 

(As shown at right)

How to remove batteries

NOTE

NOTE

8-3. Setting the Current Time

After changing the batteries and pressing reset, be sure to reset the current time. 

(When reset is pressed, the current time reverts to 

[

])

1.

  

Press   for two seconds or more.

2.

 

Set the hour with 

/

 of the 

.

If you press and hold the button, the time changes quickly.

3.

 

Set the minutes with 

/

 of the 

.

If you press and hold the button, the time changes quickly.

4.  Pressing   completes the time setting.

While you are setting the current time, the time display flashes but the colon does not.

 

If the buttons are not pressed for three minutes while setting the current time, 

it is set to the displayed time.

When reset is pressed, the timer settings are deleted.

NOTE

Once the clock displays starts blinking, the clock can be set.

Dispose of the used batteries at the designated location in compliance with the 

applicable local ordinances.

Do not swallow the battery.

After removing the battery from remote controller, keep it away from the reach of children.

The battery can cause death by suffocation if swallowed.

When inserting the battery, make sure the polarities (+ and -) are correct.

WARNING

1. Receiver

Receives the signal sent from the 

remote controller.

2.  Emergency 

operation 
button

Indicator lamps

When an error occurs, one of the 
lamps flashes. When an indicator 
lamp is flashing, refer to 
“8-13. Before Requesting Service”.

3.

Lights up when the unit is operating. 

4.

Lights up when the timer is set.

5. STANDBY lamp

OPERATION lamp

Timer lamp

• 

 The lamp in the HEAT mode

lights up at the following times:
during the startup, during the
thermostat operation, and during
the defrosting.

• 

 The lamp flashes when an error

occurs.

6.

This lamp is for notifying you when 
the filter needs to be cleaned.

FILTER lamp

NOTE

• If non-cooling/heating free type is being used, it will beep twice and the operating lamp will light up 

  on the display; if the timer and standby lamps blink alternately, a confl ict between the heating and 
  cooling exists, so the uncannot operate in the desired mode. (On models that do not have an Auto
  function, even if Auto is selected, it works in the same way.)

• When the local operation is disabled by centralized control or similar cause,and if the Start/Stop    , 

  Mode      or Temperature setting button                 is pressed, the unit will beep five times and the 
  change will not be made.

RECEIVER

CZ-RWSC3

60B6LQJOHB%LJ3$&LQGE

 

 

1

2

3

4

5

6

8-5

SM830262-00_大洋州向け シングル天埋_TD&SM.indb   

17/12/27   14:24:27

Содержание S-160PE1R5A



























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-160PE1R5A

YASKAWA D1000 Series Instruction Manual preview
D1000 Series
Бренд: YASKAWA Страницы: 251
C&C TECHNIC YH-01 User Manual preview
YH-01
Бренд: C&C TECHNIC Страницы: 2
Generac Power Systems 1.6L 18 kW Owner'S Manual preview
1.6L 18 kW
Бренд: Generac Power Systems Страницы: 64
Trace Engineering SW II Datasheet preview
SW II
Бренд: Trace Engineering Страницы: 2
Icy Box IB-CVB513 Quick Installation Manual preview
IB-CVB513
Бренд: Icy Box Страницы: 2
OTS FT800-SMR Installation And Operation Manual preview
FT800-SMR
Бренд: OTS Страницы: 14
Samlexpower PST-1000-12 Owner'S Manual preview
PST-1000-12
Бренд: Samlexpower Страницы: 60
Matrix D-PG 1000 Original Instructions Manual preview
D-PG 1000
Бренд: Matrix Страницы: 55
Samlexpower SA-1000K Series User Manual preview
SA-1000K Series
Бренд: Samlexpower Страницы: 23
Advantech PCIE-1884 Startup Manual preview
PCIE-1884
Бренд: Advantech Страницы: 4
Maurer HT-E-1500-12 Manual preview
HT-E-1500-12
Бренд: Maurer Страницы: 2
GUSTARD DAC-X20PRO User Manual preview
DAC-X20PRO
Бренд: GUSTARD Страницы: 22
Sollae Systems CSE-M73A User Manual preview
CSE-M73A
Бренд: Sollae Systems Страницы: 65
Lindy 43289 User Manual preview
43289
Бренд: Lindy Страницы: 2
Urrea UP125 User Manual And Warranty preview
UP125
Бренд: Urrea Страницы: 12
Data Connect DCE 5201V-BM User Manual preview
DCE 5201V-BM
Бренд: Data Connect Страницы: 32
Profi-pumpe INVERTER PUMP CONTROL 5 Operating Instructions Manual preview
INVERTER PUMP CONTROL 5
Бренд: Profi-pumpe Страницы: 20
Siko SG32 Translation Of The Original Installation Instructions preview
SG32
Бренд: Siko Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды