Panasonic S-160PE1R5A Скачать руководство пользователя страница 203

Страница: 203 / 218

8-5. Timer Operation

When setting the timer, make sure the current time on the remote controller is accurate.

The timer’s clock can only be set when the display of the remote controller is ON.

After setting the timer, put the remote controller in a place where its signal will reach the

receiver of the indoor unit. (When the time set for the timer is reached, a signal is sent

from the remote controller to Start/Stop the unit.)

1,2

Using the Timer

1. Press either

of the

, and while the time is being displayed,

if you press

again, a scheduled time can be set.

The time last set on the timer is displayed.

“--:--“ indicates time to change the batteries.

2. Press either

of the

and set the timer to the desired time.

Every time you press

, the time changes in 10 minute increments.

If you press and hold the button, the time changes quickly.

3. After setting the timer, if you press

, the time you set changes to a steady display,

indicating settings are complete.

After the timer setting is displayed for three seconds, the display reverts to the current time.

Combining ON and OFF Timers

Setting the ON and OFF timers, respectively.

Checking the timer setting

If you press either

/ for the

or the

, the scheduled time is displayed for four seconds.

When no timer setting has been made, it displays --:--. (Initial Setting)

Changing a timer setting

Canceling a timer setting

If you press [CANCEL], the timer setting is canceled.

If you wish to cancel the setting for either the

or the

timer, press

, and long-press [CANCEL] while

scheduled time is displayed.

Using the same timer setting every day

If you press

for 2 or more seconds, “

” is displayed and the ON timer or the OFF timer will operate repeatedly

every day.

If you press

again for two seconds or more, “

” goes off and the timer operates only one time.

Press

for the

or the

, and then when the timer setting is displayed, press

for the timer again.

8-7

SM830262-00_大洋州向けシングル天埋_TD&SM.indb 7

17/12/27 14:24:27

Содержание S-160PE1R5A



























































































































































































































Результаты поиска

Содержание S-160PE1R5A

Отзывы:

Бренды по названию

Популярные бренды

Panasonic S-160PE1R5A, Технические данные и руководство по обслуживанию

Результаты поиска

Содержание S-160PE1R5A

Отзывы:

Бренды по названию

Популярные бренды