Panasonic PT-VZ585N, Руководство по эксплуатации

Страница: 65 / 181

[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the submenu.
Refer to “Navigating through the menu” (
Æ
page 61) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode most suitable for the image source and the environment in which the
projector is used.
1) Press
as
to select [PICTURE MODE].
2) Press
qw
or the <ENTER> button.
f
The [PICTURE MODE] individual adjustment screen is displayed.
3) Press
qw
to switch the items.
f
The items will switch each time you press the button.
[STANDARD] The picture becomes suitable for movie-based images in general.
[DYNAMIC] The picture becomes suitable for use in bright areas.
[BLACKBOARD] The picture becomes suitable for projecting on a black board.
[WHITE BOARD] The picture becomes suitable for projecting on a white board.
[CINEMA]
*
1
The picture becomes suitable for movie contents.
[NATURAL] *
2
The picture becomes suitable for use in a dark room.
*1 Only for the movie-based signals.
*2 Only for the still image signals.
[CONTRAST]
You can adjust the contrast of the colors.
1) Press
as
to select [CONTRAST].
2) Press
qw
or the <ENTER> button.
f
The [CONTRAST] individual adjustment screen is displayed.
3) Press
qw
to adjust the level.
Operation Adjustment Adjustment range
Press the
w
button.
The screen becomes brighter.
-32 ~ +32
Press the
q
button. The screen becomes darker.
Attention
f
Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].
[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
1) Press
as
to select [BRIGHTNESS].
2) Press
qw
or the <ENTER> button.
f
The [BRIGHTNESS] individual adjustment screen is displayed.
3) Press
qw
to adjust the level.
Operation Adjustment Adjustment range
Press the
w
button. Increases the brightness of the dark (black) parts of the screen.
-32 ~ +32
Press the
q
button. Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
(Only for movie-based signal input)
You can adjust the color saturation of the projected image.
1) Press
as
to select [COLOR].
ENGLISH - 65
Chapter 4 Settings - [PICTURE] menu