Panasonic PT-VZ585N, Руководство по эксплуатации

Страница: 48 / 181

2) Press
qw
to switch the setting.
f
When all settings are completed, proceed to Step 3) .
3) Press the <ENTER> button.
f
Confirm the setting value and complete the initial setting.
Setting [PROJECTION METHOD]
If the screen display is upside down or is reversed, please change the settings, refer to “Installation mode”
(
Æ
page 34). After initialization, You can change the settings from the [PROJECTOR SETUP] menu →
[PROJECTION METHOD].
1) Press
as
to select the [PROJECTION METHOD].
2) Press
qw
to switch the settings.
f
When set to [AUTO], the built-in angle sensor detects the orientation of the projector and automatically
switches to [FRONT/DESK] or [FRONT/CEILING]. Normally, set to [AUTO].
f
To project from the rear of the screen, select [REAR/DESK] or [REAR/CEILING] (using a translucent
screen).
Setting [SCREEN FORMAT] and [SCREEN POSITION]
Set the image aspect ratio and display position according to the screen being used. When the initial setting is
complete, you can change the setting from the [DISPLAY OPTION] menu → [SCREEN SETTING] → [SCREEN
FORMAT]/[SCREEN POSITION].
1) Press
as
to select the [SCREEN FORMAT].
2) Press
qw
to select the aspect ratio.
3) Press
as
to select the [SCREEN POSITION].
f
In the following cases, the [SCREEN POSITION] cannot be changed.
g
For PT-VZ585N and PT-VW545N, [SCREEN FORMAT] is set to [16:10].
g
For PT-VX615N, [SCREEN FORMAT] is set to [4:3].
4) Press
qw
to select the image position.
f
Select from [CENTER]/[LEFT]/[RIGHT] or [CENTER]/[UPPER]/[LOWER].
Setting [STANDBY MODE]
Set the operating mode at standby. When the initial setting is complete, you can change the setting from the
[PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE].
1) Press
as
to select [STANDBY MODE].
2) Press
qw
to select the operation mode.
f
The factory default setting is [NORMAL], which enables the network function even in standby mode.
f
To lower the power consumption level during standby, set to [ECO].
Making adjustments and selections
It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted.
3)
5) 9) 6) 1) 8)
4) 4)
3)
7)
7)
48 - ENGLISH
Chapter 3 Basic Operations - Switching on/off the projector