Panasonic PT-VZ585N, Руководство по эксплуатации

Страница: 109 / 181

[NETWORK STATUS]
Displays the network status.
1) Press
as
to select [NETWORK STATUS].
2) Press the <ENTER> button.
f
The
[NETWORK STATUS]
screen is displayed.
3) Press
as
to switch between the screens.
f
The pages will switch each time you press the button.
[WIRED LAN] (1/3 page), [WIRELESS LAN] (2/3 page), [WIRELESS LAN] (3/3 page)
[WIRED LAN]
Displays the network information of the wired LAN that set on the projector.
[DHCP] Displays the usage state of the DHCP server.
[IP ADDRESS] Displays the IP address.
[SUBNET MASK] Displays the subnet mask.
[DEFAULT GATEWAY] Displays the default gateway.
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the alternate DNS server.
[MAC ADDRESS] Displays the MAC address of wired LAN.
[EAP] Displays the type of EAP.
[WIRELESS LAN]
Displays the network information of the wireless LAN that set on the projector.
[ANTENNA LEVEL] Displays the radio wave state of the wireless LAN.
[NETWORK]
Displays the connection method of the wireless LAN.
[SSID] Displays the character string of SSID.
[AUTHENTICATION] Displays the user authentication method.
[EAP] Displays the type of EAP.
[ENCRYPTION] Displays the encryption method.
[DEFAULT KEY] Displays the number of the default key.
[DHCP] Displays the usage state of the DHCP server.
[IP ADDRESS] Displays the IP address.
[SUBNET MASK] Displays the subnet mask.
[DEFAULT GATEWAY] Displays the default gateway.
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the alternate DNS server.
[MAC ADDRESS] Displays the MAC address of wireless LAN.
Note
f
When [WIRELESS LAN] is set to [DISABLE], the [WIRELESS LAN] pages of the [NETWORK STATUS] screen will not be displayed.
[INITIALIZE]
This function is used to return various setting values of [NETWORK/USB] to the factory default value.
1) Press
as
to select [INITIALIZE].
2) Press the <ENTER> button.
3) When the [INITIALIZE] screen is displayed, press
qw
to select [OK] and then press the <ENTER> button.
Note
f
If the [SECURITY] menu → [PASSWORD] is set to [ON], the
[PASSWORD]
screen will be displayed when [INITIALIZE] is selected and the
<ENTER> button is pressed. Continue your operation after entering the security password set for the projector.
ENGLISH - 109
Chapter 4 Settings - [NETWORK/USB] menu