Panasonic PT-RZ31K Скачать руководство пользователя

Страница: 8 / 265

8 - ENGLISH

Read this first!

FCC NOTICE (USA)

Verification

Model Number:

PT-RZ31K / PT-RS30K

Trade Name:

Panasonic

Responsible Party: Panasonic Corporation of North America

Address:

Two Riverfront Plaza, Newark, NJ 07102-5490

General Contact:

http://www.panasonic.com/support

Projector Contact: https://panasonic.net/cns/projector/

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided

power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any

unauthorized changes or modifications to this equipment could void the user’s authority to operate this device.

Importer’s name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany

Содержание PT-RZ31K










































































































































































































































































Результаты поиска

Содержание PT-RZ31K

Отзывы:

Похожие инструкции для PT-RZ31K

Бренды по названию

Популярные бренды

Panasonic PT-RZ31K, Руководство по эксплуатации

Результаты поиска

Содержание PT-RZ31K

Отзывы:

Похожие инструкции для PT-RZ31K

Бренды по названию

Популярные бренды