Panasonic PT-RZ31K, Руководство по эксплуатации

Страница: 122 / 265

Chapter 4 Settings — [DISPLAY OPTION] menu
122 - ENGLISH
[AUTO(2D)]
*1
Displays 2D image of the simultaneous format.
*1 This can be set only when [SIMUL INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2].
Note
f
If [AUTO(2D)] is set, 2D images are displayed when the same 2D compatible signals are entered to each input.
f
If [AUTO(3D)] is set, 3D images are displayed when the same 3D compatible signals are entered to each input.
f
[SIMUL INPUT SETTING] cannot be set during P IN P.
f
[HDMI/DVI-D] or [SDI1/SDI2] in [SIMUL INPUT SETTING] (including the input set as the primary input or the secondary input) is fixed to
[OFF] when the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT MODE] is set to anything other than [OFF].
f
[SDI1/SDI2] in [SIMUL INPUT SETTING] is fixed to [OFF] when the [DISPLAY OPTION] menu → [SDI IN] → [SDI LINK] is set to anything
other than [SINGLE].
f
This may not function properly for some connected external devices.
f
This may not function properly depending on the signal.
f
Usage of each input signal is displayed in [RGB1] and [RGB2], in [HDMI] and [DVI-D], and in [SDI1] and [SDI2] of the [SIMUL INPUT
SETTING] screen when [AUTO(3D)] or [AUTO(2D)] is set.
[SIMUL INPUT SETTING] Usage of the input signal Details
[AUTO(3D)]
[LEFT INPUT]
Uses the signal for the corresponding input as a signal for the left
eye image.
[RIGHT INPUT]
Uses the signal for the corresponding input as a signal for the right
eye image.
[AUTO(2D)]
*1
[1st FRAME INPUT]
Uses the signal for the corresponding input as a signal for the odd
frame.
[2nd FRAME INPUT]
Uses the signal for the corresponding input as a signal for the even
frame.
*1 This can be set only when [SIMUL INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2].
[RGB IN]
Set to match the signal to input to the <RGB 1 IN> terminal.
Setting [RGB1 INPUT SETTING]
1) Press
as
to select [RGB IN].
2) Press the <ENTER> button.
f
The
[RGB IN]
screen is displayed.
3) Press
as
to select [RGB1 INPUT SETTING].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[RGB/YP
B
P
R
] Select this item when an RGB signal or YC
B
C
R
/YP
B
P
R
signal is input to the <RGB 1 IN> terminal.
[VIDEO] Select this item when a video signal is input to the <RGB 1 IN> (<R/P
R
/VIDEO>) terminal.
[Y/C]
Select this item when a luminance signal and color signal are input to the <RGB 1 IN> (<G/Y>, <B/P
B
/
C>) terminal.
Switching the slice level of an input sync signal
1) Press
as
to select [RGB IN].
2) Press the <ENTER> button.
f
The [RGB IN] screen is displayed.
3) Press
as
to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].
4) Press
qw
to switch the item.
[LOW] Sets the slice level to [LOW].
[HIGH] Sets the slice level to [HIGH].