Panasonic PT-RZ31K, Руководство по эксплуатации

Страница: 171 / 265

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 171
[ALL USER DATA]
Returns all setting values including [REGISTERED SIGNAL], [NETWORK/E-MAIL], and [LOGO
IMAGE] to the factory default settings.
The projector enters the standby mode to reflect the setting values.
[REGISTERED SIGNAL]
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the
registered signal” (
x
page 175).
[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
5) Press the <ENTER> button.
6) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
Initial password of the factory default setting:
awsqawsq
f
The following settings are not initialized even if [ALL USER DATA] is executed.
g
The [DISPLAY OPTION] menu → [UNIFORMITY]
g
The [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE]
g
The [PROJECTOR SETUP] menu → [OPERATION SETTING] → [MAX LIGHT OUTPUT LEVEL]
g
The [PROJECTOR SETUP] menu → [STANDBY MODE]
g
The [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET
DARK]
g
[FILTER TYPE] and [FILTER COUNTER] in the [PROJECTOR SETUP] menu → [FILTER SETTING]
f
When a projection lens equipped with EEPROM is attached, following setting will not return to factory default setting even if [ALL USER
DATA] is executed.
g
The [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE]
g
The [PROJECTOR SETUP] menu → [LENS] → [LENS INFORMATION SETTING] → [LENS ID] and [LENS NAME]
f
To initialize the setting values of [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] in the [PROJECTOR SETUP] menu → [LENS]
→ [ACTIVE FOCUS OPTIMIZER], execute the [PROJECTOR SETUP] menu → [LENS] → [FOCUS OFFSET SETUP] → [INITIALIZE].
f
If [ALL USER DATA] is executed, the
[INITIAL SETTING]
screen is displayed when the projection is started the next time.
[SERVICE PASSWORD]
This function is used by a service person.