Panasonic PT-RZ31K, Руководство по эксплуатации

Страница: 185 / 265

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 185
[Art-Net CHANNEL SETTING]
Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net
function” (
x
page 227).
1) Press
as
to select [Art-Net CHANNEL SETTING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[2] Uses the channel assignment in standard setting.
[3]
*1
Uses the channel assignment with the setting that can numerically control the lens position.
[USER]
Changes the channel assignment.
[1]
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
*1 This item can be set in following cases.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a projection
lens with the stepping motor is attached.
f
When anything other than [USER] is selected, the function assigned to the channel is displayed by pressing
the <ENTER> button.
f
When [USER] is selected, proceed to Step 3) .
3) Press the <ENTER> button.
f
The [Art-Net CHANNEL SETTING] screen is displayed.
4) Press
as
to select the channel to set, and press
qw
to switch the item.
[LIGHT OUTPUT] Adjusts the amount of light.
[INPUT SELECT] Switches the input.
[LENS POSITION] Moves the lens position.
[LENS H SHIFT] Adjusts the lens shift in the horizontal direction.
[LENS V SHIFT]
Adjusts the lens shift in the vertical direction.
[LENS FOCUS] Adjusts the focus.
[LENS ZOOM] Adjusts the zoom.
[POWER] Controls the power status.
[SHUTTER] Controls the shutter.
[FADE-IN]
Sets the fade-in time.
[FADE-OUT] Sets the fade-out time.
[GEOMETRY] Performs geometric adjustment.
[CUSTOM MASKING]
Performs geometric adjustment using a computer.
To use PC-1, PC-2, and PC-3, the optional Upgrade Kit (Model No.: ET-UK20) is required.
[FREEZE] Freezes the projected image.
[COLOR]
Adjusts the color saturation.
[TINT] Adjusts the tint.
[RASTER PATTERN] Displays the raster pattern.
[LENS H SHIFT MSB]
*1
Coarsely adjusts the horizontal position of the lens.
[LENS H SHIFT LSB]
*1
Finely adjusts the horizontal position of the lens.
[LENS V SHIFT MSB]
*1
Coarsely adjusts the vertical position of the lens.
[LENS V SHIFT LSB]
*1
Finely adjusts the vertical position of the lens.
[LENS FOCUS MSB]
*1
Coarsely adjusts the focus position of the lens.
[LENS FOCUS LSB]
*1
Finely adjusts the focus position of the lens.
[LENS ZOOM MSB]
*1
Coarsely adjusts the zoom position of the lens.
[LENS ZOOM LSB]
*1
Finely adjusts the zoom position of the lens.
[ENABLE/DISABLE] Enables/disables the control of the projector with the Art-Net function.
[NONE] No definition
*1 These items can be selected in following case.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a projection
lens with the stepping motor is attached.
f
The setting can be also made by pressing
as
to select the channel, pressing the <ENTER> button to
display the item list, pressing
asqw
to select the item, and pressing the <ENTER> button.