Panasonic PT-RZ31K, Руководство по эксплуатации

Страница: 109 / 265

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 109
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Standard setting.
[FAST]
*1
Simplifies the image processing to reduce image frame delay.
[FIXED]
*2
Sets image frame delay to be constant regardless of the image position or magnification.
*1 When input signals are other than interlaced signals, [FAST] cannot be set.
*2 Only when moving image signals and still image signals with the vertical scanning frequency of 50 Hz or 60 Hz are input
Note
f
[DIGITAL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST].
f
[FRAME RESPONSE] cannot be set during P IN P.
[FRAME CREATION]
Set the amount of image frame interpolation.
The image with fast movement can be displayed more smoothly by automatically generating the intermediate
frame from the previous and next frame.
1) Press
as
to select [FRAME CREATION].
2) Press the <ENTER> button.
f
The
[FRAME CREATION]
screen is displayed.
3) Press
as
to select [FRAME CREATION MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Disables the frame creation function.
[1] Sets the amount of interpolation weaker.
[2] Sets the amount of interpolation midway.
[3]
Sets the amount of interpolation stronger.
Note
f
The effect may be difficult to notice depending on the image.
f
Switch the setting when the image looks unnatural due to delay of image or generation of noise.
f
[FRAME CREATION] is fixed to [OFF] in the following cases.
g
When [FRAME RESPONSE] is set to [FAST]
g
When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(3D)] or [AUTO(2D)] and displaying an image in
simultaneous format
g
When the internal test patter is displayed.
f
The [FRAME CREATION] setting is disabled and fixed to [OFF] when [FRAME CREATION] is set to anything other than [OFF] and the
following setting or operation is performed.
g
Set [FRAME RESPONSE] to [FAST].
g
Set the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] to [AUTO(3D)] or [AUTO(2D)] to display an image in simultaneous format
Setting [FILM DETECTION]
Set the film detection function to enhance the video resolution by determining if it is a content that the telecine is
performed on the input signal.
1) Press
as
to select [FRAME CREATION].
2) Press the <ENTER> button.
f
The [FRAME CREATION] screen is displayed.
3) Press
as
to select [FRAME CREATION MODE].
4) Press
qw
to select a mode from [1], [2], or [3].
5) Press
as
to select [FILM DETECTION].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.