Panasonic PT-RZ16K, Руководство по эксплуатации

Страница: 171 / 270

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 171
[REMOTE2 MODE]
You can set the <REMOTE 2 IN> terminal.
1) Press
as
to select [REMOTE2 MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT]
Uses pin assignment of the <REMOTE 2 IN> terminal in standard setting. (
x
page 248)
[USER]
Changes the setting of the <REMOTE 2 IN> terminal.
f
When [USER] is selected, proceed to Step 3) .
3) Press the <ENTER> button.
4) Press
as
to select one from [PIN2] to [PIN8], and press
qw
to switch the setting.
[FUNCTION BUTTON]
Set the function of the <FUNCTION> button on the remote control.
1) Press
as
to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f
The [FUNCTION BUTTON] screen is displayed.
3) Press
as
to select a function.
[DISABLE] Disables the <FUNCTION> button.
[P IN P]
Switches the [P IN P] setting ([OFF], [USER1], [USER2], or [USER3]). (
x
page 176)
[SUB MEMORY] Displays the sub memory list. (
x
page 181)
[SYSTEM SELECTOR]
Switches the [SYSTEM SELECTOR] setting according to the input signal of the image being
projected.
f
When the input signal is anything other than SDI1 input or SDI2 input
The [PICTURE] menu
→ [SYSTEM SELECTOR] (
x
page 99)
f
When the input signal is SDI1 input or SDI2 input
g
The [DISPLAY OPTION] menu → [SDI IN] → [SINGLE LINK SETTING] → [SDI1]/[SDI2] →
[SYSTEM SELECTOR] (
x
page 132)
g
The [DISPLAY OPTION] menu → [SDI IN] → [DUAL LINK SETTING] → [SYSTEM SELECTOR]
(
x
page 132)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x
page 96)
[FREEZE]
Temporarily pauses the image. (
x
page 140)
[WAVEFORM MONITOR]
Displays the waveform of the input signal. (
x
page 140)
[LENS MEMORY LOAD]
Loads the registered lens memory. (
x
page 146)
[LEFT/RIGHT SWAP] Switches the [LEFT/RIGHT SWAP] setting. (
x
page 117)
[PROJECTION METHOD]
Switches the [PROJECTION METHOD] setting. (
x
page 143)
4) Press the <ENTER> button.
[STATUS]
Display the status of the projector.
1) Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The [STATUS] screen is displayed.
3) Press
qw
to switch the pages.
f
The page will change each time you press the button.
[PROJECTOR TYPE] Displays the type of the projector.
[SERIAL NUMBER] Displays the serial number of the projector.
[PROJECTOR RUNTIME] Displays the runtime of the projector.
[LIGHT RUNTIME] Displays the runtime of the light source 1 and the light source 2.