Panasonic PT-RZ16K, Руководство по эксплуатации

Страница: 133 / 270

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 133
4) Press
as
to select [SDI1] or [SDI2], and press the <ENTER> button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5) Press
as
to select [SYSTEM SELECTOR].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Automatically selects [RGB], [YP
B
P
R
4:4:4], [YP
B
P
R
4:2:2], or [XYZ].
[RGB], [YP
B
P
R
4:4:4], [YP
B
P
R
4:2:2], or [XYZ] is automatically selected by reading the payload ID
attached to the input signal. [RGB] is selected when the payload ID is not attached to the input signal.
[RGB] Fixes to [RGB].
[YP
B
P
R
4:4:4] Fixes to [YP
B
P
R
4:4:4].
[YP
B
P
R
4:2:2]
Fixes to [YP
B
P
R
4:2:2].
[XYZ] Fixes to [XYZ].
Setting [BIT DEPTH] in [SDI IN]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The
[SDI IN]
screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f
When [DUAL LINK SETTING] is selected, proceed to Step
5)
.
4) Press
as
to select [SDI1] or [SDI2], and press the <ENTER> button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5) Press
as
to select [BIT DEPTH].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically select [12-bit] or [10-bit].
[12-bit] Fixes to [12-bit].
[10-bit] Fixes to [10-bit].
Setting [SIGNAL LEVEL] in [SDI IN]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The
[SDI IN]
screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f
The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f
When [DUAL LINK SETTING] is selected, proceed to Step
5)
.
4) Press
as
to select [SDI1] or [SDI2], and press the <ENTER> button.
f
The
[SINGLE LINK SETTING]
or
[DUAL LINK SETTING]
screen of the selected item is displayed.
5) Press
as
to select [SIGNAL LEVEL].
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[64-940] Normally use this setting.
[4-1019] Select this item when gray is displayed as black.