Panasonic PT-RZ16K, Руководство по эксплуатации

Страница: 137 / 270

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 137
Note
f
When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.
f
To create and register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Panasonic
website (https://panasonic.net/cns/projector/).
[UNIFORMITY]
Correct the brightness unevenness and color unevenness of the whole image.
Setting [GRADIENT CORRECTION]
Correction is performed in vertical and horizontal directions to approach the even condition when unevenness in
one direction is occurring throughout the whole image.
1) Press
as
to select [UNIFORMITY].
2) Press the <ENTER> button.
f
The [UNIFORMITY] screen is displayed.
3) Press
as
to select [WHITE], [RED], [GREEN], or [BLUE].
4) Press
qw
to adjust the level.
Item Operation Adjustment Range of adjustment
[VERTICAL]
Press
w
.
The lower-side color becomes
pale, or the upper-side color
becomes dark.
-127 - +127
Press
q
.
The upper-side color becomes
pale, or the lower-side color
becomes dark.
[HORIZONTAL]
Press
w
.
The left-side color becomes pale,
or the right-side color becomes
dark.
Press
q
.
The right-side color becomes
pale, or the left-side color
becomes dark.
Setting [FLEXIBLE CORRECTION]
Correct the topical brightness unevenness and color unevenness using the correction value in the projector.
1) Press
as
to select [UNIFORMITY].
2) Press the <ENTER> button.
f
The [UNIFORMITY] screen is displayed.
3) Press
as
to select [FLEXIBLE CORRECTION].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[GEOMETRY UNLINKED]
Corrects the brightness unevenness and color unevenness using the correction value
*1
in the
projector. The shape of the projected image and the compensation area of uniformity are not linked.
Select this item to correct the brightness unevenness and the color unevenness of the light irradiated
from the projection lens.
[OFF]
Does not perform correction using the correction value in the projector. Select this item to prioritize
the brightness of the whole projected image.
[GEOMETRY LINKED]
Corrects the brightness unevenness and color unevenness using the correction value
*1
in the
projector. When the geometric adjustment is performed, the shape of the projected image and the
compensation area of uniformity are linked.
Select this item when projecting at an angle against the flat screen, or when projecting on a curved
screen.
*1 The correction value can be set to the desired value by applying the optional Upgrade Kit (Model No.: ET‑UK20). To purchase the product,
consult your dealer.
f
Proceed to Step 5) when anything other than [OFF] is selected.
5) Press
as
to select [MODE].