Panasonic PT-RW630 series Скачать руководство пользователя страница 62

Страница: 62 / 185

Chapter 3

Basic Operations — Operating with the remote control

62 - ENGLISH

Operating with the remote control

Using the shutter function

If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image

temporarily.

button

Press the <SHUTTER> button.

The image disappears.

This operation can be also performed using the <SHUTTER> button on the control panel.

2) Press the <SHUTTER> button again.

The image is displayed.

Note

The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed).

You can set the fade-in/fade-out time for the image from [DISPLAY OPTION] menu

→

[SHUTTER SETTING].

If the shutter function is used in an operating environment temperature of close to 0 °C (32 °F), the light source may light up dimly for the

warm-up process.

Using the on-screen display function

Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display, such as the menu or the

input terminal name.

button

Press the <ON SCREEN> button.

The on-screen display disappears.

2) Press the <ON SCREEN> button again.

The on-screen display appears.

Note

If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is off (hidden), the on-screen

display is turned on.

Содержание PT-RW630 series


























































































































































































Результаты поиска

Содержание PT-RW630 series

Отзывы:

Panasonic PT-RW630 series, Руководство по эксплуатации, Страница: 62 / 185

Результаты поиска

Содержание PT-RW630 series

Отзывы: