Panasonic PT-RW630 series Скачать руководство пользователя страница 183

Страница: 183 / 185

Chapter 6

Appendix — Precautions for attaching the Ceiling Mount Bracket

ENGLISH - 183

Precautions for attaching the Ceiling Mount Bracket

When installing the projector to the ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.: ET-PKD120H (for high ceilings),

ET-PKD120S (for low ceilings), ET-PKD130H (for High Ceilings, 6-axis Adjustment), ET-PKD130B (Projector Mount Bracket)) specified by

Panasonic. The Ceiling Mount Bracket (Model No.: ET-PKD120H (for high ceilings), ET-PKD120S (for low ceilings), ET-PKD130H (for High

Ceilings, 6-axis Adjustment)) is used in combination with the Ceiling Mount Bracket (Model No.: ET-PKD130B (Projector Mount Bracket)).

When installing the projector, attach the drop-prevention set that comes with the ceiling mount bracket to the projector. When the drop-

prevention kit (Service Model No.: TTRA0214) is necessary, consult your dealer.

Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.

Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by

Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.

Unused products must be removed promptly by a qualified technician.

Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or

impact screwdrivers.

Read the Installation Instructions for the ceiling mount bracket for details.

The model numbers of accessories and optional accessories are subject to change without prior notice.

Bottom view

Model No. of Ceiling Mount Bracket: ET-PKD120H (for high ceilings)

ET-PKD120S (for low ceilings)

12 mm (15/32")

Torque: (M6) 4 ± 0.5 N·m

ET-PKD130H (for High Ceilings, 6-axis Adjustment)
ET-PKD130B (Projector Mount Bracket)

Содержание PT-RW630 series


























































































































































































Результаты поиска

Содержание PT-RW630 series

Отзывы:

Panasonic PT-RW630 series, Руководство по эксплуатации, Страница: 183 / 185

Результаты поиска

Содержание PT-RW630 series

Отзывы: