Panasonic PT-RW630 series, Руководство по эксплуатации, Страница: 138 / 185

Chapter 4 Settings — [NETWORK] menu
138 - ENGLISH
[DIGITAL INTERFACE BOX]
When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the <DIGITAL LINK/LAN> terminal, the main menu of
ET-YFB100G is displayed. Refer to the Operating Instructions of ET-YFB100G for details.
Note
f
When [EXTRON XTP] is set to [ON], [DIGITAL INTERFACE BOX] cannot be selected.
f
The operation guidance for the “RETURN” button is displayed on the menu screen of the Digital Interface Box. The projector does not have
the “RETURN” button, but same operation is available with the <MENU> button.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1) Press
as
to select [Art-Net SETUP].
2) Press
qw
to select an item.
f
The items will switch each time you press the button.
[OFF] Disables the Art-Net function.
[ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X.
[ON(10.X.X.X)]
Enables the Art-Net function and sets the IP address to 10.X.X.X.
[ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].
f
When other than [OFF] is selected, proceed to Step 3) .
3) Press the <ENTER> button.
f
The [Art-Net SETUP] screen is displayed.
4) Press
as
to select an item, and press
qw
to switch the settings.
[NET] Enter [NET] to be used when the projector processes Art-Net.
[SUB NET] Enter [SUB NET] to be used when the projector processes Art-Net.
[UNIVERSE]
Enter [UNIVERSE] to be used when the projector processes Art-Net.
[START ADDRESS] Enter [START ADDRESS] to be used when the projector processes Art-Net.
5) Press
as
to select [STORE], and press the <ENTER> button.
6) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.
Network connection
The projector has a network function, and the following operations are available from the computer using the web control.
f
Setting and adjustment of the projector
f
Display of the projector status
f
Sending E-mail messages when there is a problem with the projector
The projector supports “Crestron Connected
TM
”, and the following application software of Crestron Electronics, Inc. can be used.
f
RoomView Express
f
Fusion RV
f
RoomView Server Edition
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f
“Crestron Connected
TM
” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems
connected to the network using a computer.
f
For details of “Crestron Connected
TM
”, refer to the website of Crestron Electronics, Inc. (English only)
URL http://www.crestron.com
To download “RoomView Express”, go to the following website of Crestron Electronics, Inc. (English only)
URL http://www.crestron.com/getroomview
f
A LAN cable is required to use the network function.