Panasonic PT-RW630 series Скачать руководство пользователя страница 140

Страница: 140 / 185

Chapter 4

Settings — [NETWORK] menu

140 - ENGLISH

For the LAN cable between the twisted-pair-cable transmitter and the projector, use a cable that meets the following criteria:

Compatible with CAT5e or higher

Shielded type (including connectors)

Straight-through

Single wire

The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). If this distance is

exceeded, image may be disrupted or a malfunction may occur in LAN communication.

When laying cables between the twisted-pair-cable transmitter and the projector, check that cable characteristics are compatible with

CAT5e or higher using tools such as a cable tester or cable analyzer.

When a relay connector is used, include it in the measurement.

Do not use a hub between the twisted-pair-cable transmitter and the projector.

Do not pull cables forcefully. In addition, do not bend or fold cables unnecessarily.

To reduce the effects of noise as much as possible, stretch out the cables between the twisted-pair-cable transmitter and the projector

without any loops.

Lay the cables between a twisted-pair-cable transmitter and the projector away from other cables, particularly power cables.

When laying multiple cables, run them side by side along the shortest distance possible without bundling them together.

After laying the cables, confirm that the value of [SIGNAL QUALITY] in the [NETWORK] menu

→

[DIGITAL LINK STATUS] is displayed in

green to indicate normal quality. (

page 136)

For twisted-pair-cable transmitters of other manufacturers of which the operation has been verified with the projector, refer to the

Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for

the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by

the devices of other manufacturers, contact the respective manufacturers.

Accessing from the web browser

Start up the web browser on the computer.

2) Enter the IP address set on the projector into the URL entry field of the web browser.

3) Enter the user name and the password.

The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower

case).

4) Click OK.

The [Projector status] page is displayed.

Содержание PT-RW630 series


























































































































































































Результаты поиска

Содержание PT-RW630 series

Отзывы:

Panasonic PT-RW630 series, Руководство по эксплуатации, Страница: 140 / 185

Результаты поиска

Содержание PT-RW630 series

Отзывы: