Panasonic PT-RW630 series, Руководство по эксплуатации, Страница: 59 / 185

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 59
Note
f
When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed from the [PROJECTOR
SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection starts, then the [INITIAL SETTING] screen is
displayed. Refer to “When the initial setting screen is displayed” (
x
page 52) for details.
Switching off the projector
1)
2)
1)
4)
3)
2)
1) Press the power standby <
v
> button.
f
The [POWER OFF(STANDBY)] confirmation screen is displayed.
2) Press
qw
to select [OK], and press the <ENTER> button.
(Or press the power standby <
v
> button again.)
f
Projection of the image will stop, and the power indicator <ON (G)/STANDBY (R)> on the projector body lights in orange. (The fan
keeps running.)
3) Wait for a few seconds until the power indicator <ON (G)/STANDBY (R)> of the projector lights in red.
4) Press the <OFF> side of the <MAIN POWER> switch to turn off the power.
Note
f
For approximately five seconds after the projector is switched off, the indicator does not light up even if the power is switched on.
f
The projector consumes power even when the power standby <
v
> button is pressed and the projector is switched off if the main
power of the projector is on.
When the [PROJECTOR SETUP] menu → [STANDBY MODE] is set to [ECO], use of some functions is restricted, but the power
consumption during standby can be conserved.
f
The power can be turned off by pressing the <OFF> side of the <MAIN POWER> switch while projecting or by directly using the breaker
under conditions where the <MAIN POWER> switch of the projector cannot be switched off/on easily such as while installing on the ceiling.
However, the settings or adjustments performed right before the power is turned off may not be reflected.