Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 125
[OUTPUT]
Select this item when the signal input to the <SDI 1 IN> terminal is output from the <SDI 2 IN/1
OUT> terminal, and the signal input to the <SDI 3 IN> terminal is output from the <SDI 4 IN/3 OUT>
terminal.
Note
f
The <SDI 2 IN/1 OUT> terminal and the <SDI 4 IN/3 OUT> terminal do not support the input of the 6G-SDI signal or the 12G-SDI signal.
f
The <SDI 2 IN/1 OUT> terminal and the <SDI 4 IN/3 OUT> terminal support the output of the SD-SDI signal, HD-SDI signal, 3G-SDI signal,
6G-SDI signal, and 12G-SDI signal.
f
When the projector is in standby mode, a signal is not output from the <SDI 2 IN/1 OUT> terminal and the <SDI 4 IN/3 OUT> terminal.
Setting [SDI LINK] in [SLOT IN] (SDI input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The
[SLOT IN]
screen is displayed.
3) Press
as
to select [SDI LINK], and press the <ENTER> button.
f
The
[SDI LINK]
screen is displayed.
4) Press
as
to select an item.
[AUTO]
Automatically selects the single link, the dual link, or the quad link.
[SINGLE]
Sets the SDI1 input, the SDI2 input, the SDI3 input, and the SDI4 input of the Interface Board to
single link.
(Factory default setting)
[DUAL]
Sets the SDI1 input and the SDI3 input of the Interface Board to dual link.
[QUAD]
Sets the SDI1 input, the SDI2 input, the SDI3 input, and the SDI4 input of the Interface Board to quad
link.
5) Press the <ENTER> button.
Note
f
The single link is a setting to display one image with one input signal. The dual link is a setting to display one image with two input signals.
The quad link is a setting to display one image with four input signals.
f
[SDI LINK] is fixed to [SINGLE] in the following cases.
g
When [SIMUL INPUT SETTING] is set to anything other than [OFF]
g
When the [MULTI DISPLAY] menu
→
[MULTI DISPLAY MODE] is set to anything other than [OFF] and displaying the four-screen display
f
The [SDI LINK] setting cannot be changed when [BACKUP INPUT MODE] in [BACKUP INPUT SETTING] is set as the combination used for
the SDI input of the Interface Board.
f
When [SDI LINK] is set to [AUTO], use the same format for the signal to be input to the <SDI 1 IN>/<SDI 2 IN/1 OUT>/<SDI 3 IN>/<SDI 4
IN/3 OUT> terminals. If different format signal is input to even one terminal, currently displayed image may not be projected correctly.
f
[SDI MAPPING] and [3G-SDI MAPPING] cannot be set when [SDI LINK] is set to [AUTO].
f
The content set is displayed in [SDI LINK SETTINGS].
Setting [RESOLUTION] in [SLOT IN] (SDI input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The
[SLOT IN]
screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f
The
[SINGLE LINK SETTING]
screen, the
[DUAL LINK SETTING]
screen, or the
[QUAD LINK SETTING]
screen is displayed.
f
Proceed to Step
5)
when [DUAL LINK SETTING] or [QUAD LINK SETTING] is selected.
4) Press
as
to select [SDI1], [SDI2], [SDI3], or [SDI4], and press the <ENTER> button.
f
The
[SINGLE LINK SETTING]
screen for the selected item is displayed.
5) Press
as
to select [RESOLUTION], and press the <ENTER> button.
f
The
[RESOLUTION]
screen is displayed.
