Panasonic PAW-VP1000LDHW Скачать руководство пользователя страница 81

Страница: 81 / 88

DHW PAW-VP - Installation manual – 2020-05

Electrical Heater

10.3.3 Operational Menu

The operational menu is available when the controller operates in the switched on mode (ON).
One pressing of or push-button

during displaying the temperature causes entering the

SETTINGS OF TEMPERATURE mode. Keeping the push-button

pressed for 3 seconds

while the temperature displaying causes entering the SETTINGS OF HYSTERESIS. Return

from the settings to the temperature displaying is automatic after 5 seconds counted from press-

ing of the push-button. The description of parameters is presented below.

1. Setting of temperature

In this menu, the user sets the temperature to which the tank is to be heated. If 3 heaters are in-

stalled in the 3 phase system, one of three heaters will be switched off 0.5 °C before the preset

temperature. The LED diode which shows heating starts flashing.

Depending on the application, such way of the heating enables setting the temperature of heat-

ing within the range from 15 to 160 °C.

2. Setting of hysteresis

In this menu, the user sets the temperature hysteresis (the value by which the tank temperature

has to decrease to switch heating again). Setting of hysteresis is possible within the range from

1 to 10 °C.

10.3.4 Service Menu

The service menu is available when the controller operates in the switched off mode (OFF). The
push-button

shall be pressed while switching on the unit until the inscription OFF appears.

Then, within 2 seconds, the push-buttons

and

shall be pressed one after another. Mak-

ing these steps causes entering the advanced service mode and appearing the first of param

eters – SETTINGS OF HEATING DETECTION. Pressing the push-button

causes change

of the value whilst pressing

causes moving to the next parameter. Return from settings to

the OFF display is automatic after 5 seconds counted from the last pressing of the button.
The description of the described parameters is shown below:

1. Setting of heating detection

In this menu, the maker sets the status of the function of heating detection (Heating detect).

Hd1 – the detection of heating switched on, Hd0 – the detection of heating switched off. Switch-

ing off this function causes switching off detection of lack of heating (NoH) and detection of lack

of water (NoL). Switching off this function causes also switching off alarms initiated by these

events. In case of problems during heating (too frequent switching on alarms from NoH or NoL)

this function shall be set to Hd0.

Содержание PAW-VP1000LDHW

























































































Результаты поиска

Содержание PAW-VP1000LDHW

Отзывы:

Похожие инструкции для PAW-VP1000LDHW

Бренды по названию

Популярные бренды

Panasonic PAW-VP1000LDHW, Руководство по установке

Результаты поиска

Содержание PAW-VP1000LDHW

Отзывы:

Похожие инструкции для PAW-VP1000LDHW

Бренды по названию

Популярные бренды