89
VQT2G62
Advanced (Recording pictures)
[REC] mode:
¿
Taking pictures that match the scene being
recorded
(
: Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [
].
Press
3
/
4
/
2
/
1
to select the scene mode.
•
You can also use the rear dial to select.
Press [MENU/SET] to set.
•
The menu screen is switched to the recording screen in the
selected scene mode.
∫
About the information
•
If you press [DISPLAY] when selecting a scene mode in step
2
,
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
•
To change the scene mode, press [MENU/SET], and return to above step
2
by pressing
1
,
while selecting the scene mode menu [
] by pressing
3
/
4
/
2
/
1
.
•
The scene mode flash setting is reset to the initial setting when the scene mode is changed and
then used.
•
When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
•
The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
–
[SENSITIVITY]/Items other than [STANDARD] and [STANDARD] (
) in Film Mode/
[FLASH SYNCHRO]/[METERING MODE]/[I.EXPOSURE]/[ISO LIMIT SET]/[DIGITAL ZOOM]
When taking pictures of people outdoors during the day, this mode allows you to improve
the appearance of the persons concerned and make their skin tones look healthier.
∫
Technique for Portrait Mode
To make this mode more effective:
1
Rotate the zoom ring as far as possible to Tele. (when a lens with a zoom function is
used)
2
Move close to the subject to make this mode more effective.
Note
•
The initial setting for [AF MODE] is [
š
].
*
[PORTRAIT]
DMC-GF1GN-VQT2G62_eng.book 89 ページ ２００９年８月２０日 木曜日 午前１１時７分
