63
VQT2G62
Advanced (Recording pictures)
Note
•
Do not bring the flash too close to objects or close the flash while it is activated. The
objects may be discoloured by its heat or lighting.
•
Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/
Red-Eye Reduction etc. It causes a malfunction.
•
When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become bright or dark.
•
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully.
•
The white balance may not be properly adjusted if the flash level is insufficient for the subject.
•
When you use certain lenses, light from the flash may be blocked or fail to cover the lens
field of view, causing dark areas to appear in the resulting pictures.
•
When taking a picture with the flash, we recommend removing the lens hood. In some
cases it may not allow the scene to be illuminated properly.
•
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
•
The Red-Eye Reduction effect differs between people. Also, if the subject was far away from
the camera or was not looking at the first flash, the effect may not be evident.
•
When you attach an external flash, it takes priority over the built-in flash. Refer to P164 for the
external flash.
Applicable modes:
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
Select [FLASH ADJUST.] in the [REC] mode menu. (P28)
Press
2
/
1
to set the flash output and then press
[MENU/SET].
•
You can adjust from [
j
2 EV] to [
i
2 EV] in steps of [1/3 EV].
•
Select [0 EV] to return to the original flash output.
•
You can also use the rear dial to set.
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
Note
•
[
i
] or [
j
] is displayed on the flash icon in the LCD monitor/optional external viewfinder when
the flash level is adjusted.
•
The flash output setting is memorised even if the camera is turned off.
Adjust the flash output
DMC-GF1GN-VQT2G62_eng.book 63 ページ ２００９年８月２０日 木曜日 午前１１時７分
