121
VQT2G62
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P28.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•
Even when the [SENSITIVITY] is set to [ISO100]/[ISO125], [SENSITIVITY] may be set higher
than [ISO100]/[ISO125] if the picture is taken with [I.EXPOSURE] set to valid.
•
Compensation effect may not be achieved depending on the conditions.
•
[
] in the screen turns to yellow when [I.EXPOSURE] is in effect.
•
[LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
For details on [REC] mode menu settings, refer to P28.
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
Applicable modes:
[OFF]/[ON]
Note
•
If you set [ON], the countdown screen is displayed when the shutter button is pressed. Do not
move the camera at this time. After the countdown is finished, [PLEASE WAIT...] is displayed
for the same time as the selected shutter speed for signal processing.
•
We recommend using a tripod when the shutter speed is slowed to take pictures.
•
This does not operate during motion picture recording.
For details on [REC] mode menu settings, refer to P28.
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Applicable modes:
[OFF]/[200]/[400]/[800]/[1600]
Note
•
The upper limit of the ISO sensitivity can be set.
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
•
It will work when the [SENSITIVITY] is set to [AUTO] or [
].
[I.EXPOSURE] (Intelligent exposure adjustment)
[LONG SHTR NR]
[ISO LIMIT SET]
DMC-GF1GN-VQT2G62_eng.book 121 ページ ２００９年８月２０日 木曜日 午前１１時７分
