139
VQT2G62
Advanced (Playback)
∫
Delete the title
[SINGLE] setting
1
In step
4
, delete all the texts, select [EXIT], and press [MENU/SET].
2
Press [
‚
].
3
Press [MENU/SET] to close the menu.
[MULTI] setting
1
Select [EXIT] without entering text in step
4
, and then press [MENU/SET].
2
Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.
•
The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene Mode or
[LOCATION] in Travel Date can also be registered by using the operation in steps
4
and
following.
•
The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [LOCATION] in Travel Date
and [TITLE EDIT] cannot be registered at the same time.
•
You can print out texts (comments) using the “PHOTOfunSTUDIO 4.0 HD Edition” bundled
software on the CD-ROM (supplied).
•
You can set up to 50 pictures at one time with [MULTI].
•
You cannot use title edit for the following pictures.
–
Motion pictures
–
Protected pictures
–
Pictures taken with [
], [
] or [
]
–
Pictures recorded with other equipment
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [S] will be
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P28)
Press
3
/
4
to select [SINGLE] or [MULTI] and then
press [MENU/SET].
[TEXT STAMP]
Select the picture, and then
press [MENU/SET] to set.
•
[
‘
] appears on screen if the picture is
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
•
The setting is cancelled when
[DISPLAY] is pressed again.
[SINGLE]
[MULTI]
Press
2
/
1
to select
the picture.
Press
3
/
4
/
2
/
1
to
select the pictures.
DMC-GF1GN-VQT2G62_eng.book 139 ページ ２００９年８月２０日 木曜日 午前１１時７分
