VQT2G62
32
Preparation
•
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent Auto Mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
Press any button to turn on the LCD monitor again.
•
[ECONOMY] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
•
If [REVIEW] is set to [HOLD], the playback screen display can be switched (P51) during Auto
Review when taking pictures with the drive mode lever set to [
] (P45) or [
] (P70).
•
When [HOLD] has been selected, the zoom time cannot be set.
•
The Auto Review function is activated regardless of its setting when using Burst Mode (P66) or
Auto Bracket (P68) and when recording still pictures with audio (P124). (Will not enlarge/hold)
Also, you cannot set the Auto Review function.
•
If [HIGHLIGHT] (P32) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
•
[AUTO REVIEW] does not work when recording motion pictures.
•
When [AUTO REGISTRATION] in [FACE RECOG.] (P106) is set to [ON], [REVIEW] can only
be set to [3SEC.] or [5SEC.]. (zoom is switched [OFF])
•
If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P65) referring to the histogram (P59) and
then taking the picture again. It may result in a better
quality picture.
•
There may be white saturated areas if the distance
between the camera and the subject is too close
when taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will
become white saturated and appear blinking in black and white.
•
The LCD/EVF will display overexposed portions of the image as white blinking areas. These
only exist on the camera’s display, not on the actual photo.
•
This does not work while in Multi Playback (P51), Calendar Playback (P52), or Playback Zoom
(P53).
o
[AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[REVIEW]:
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]/
[HOLD]:
The pictures are displayed until shutter button is pressed
halfway.
[ZOOM]:
The picture enlarged 4
k
is displayed.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HIGHLIGHT]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
[ON]
[OFF]
DMC-GF1GN-VQT2G62_eng.book 32 ページ ２００９年８月２０日 木曜日 午前１１時７分
