VQT2G62
60
Advanced (Recording pictures)
[REC] mode:
Taking Pictures using the Built-in Flash
A
To open the flash
B
To close the flash
Press the flash until it clicks.
•
Be sure to close the flash when not in use.
•
The flash setting is fixed to [
Œ
] while the flash is
closed.
Note
•
Be careful not to catch a finger when closing a flash bulb.
Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
Select [FLASH] in the [REC] mode menu. (P28)
Press
3
/
4
to select a mode and press
[MENU/SET].
•
For information about flash settings that can be selected, refer
to
“
Available flash settings by recording mode
”
. (P61)
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
Switching to the appropriate flash setting
Item
Description of settings
‡
: AUTO
The flash is automatically activated when the recording conditions make
it necessary.
:
AUTO/Red-eye
reduction
¢
The flash is automatically activated when the recording conditions make
it necessary.
It is activated once before the actual recording to reduce the red-eye
phenomenon (eyes of the subject appearing red in the picture) and then
activated again for the actual recording.
•
Use this when you take pictures of people in low lighting
conditions.
‰
: Forced flash ON
The flash is activated every time regardless of the recording conditions.
•
Use this when your subject is back-lit or under fluorescent light.
:
Forced ON/Red-eye
reduction
¢
The flash is activated every time regardless of the recording conditions.
Simultaneously it reduces the red-eye phenomenon.
•
Use this when your subject is back-lit or under fluorescent light.
DMC-GF1GN-VQT2G62_eng.book 60 ページ ２００９年８月２０日 木曜日 午前１１時７分
