Panasonic KXTVS100 - VOICE MAIL SYSTEM, Быстрое руководство по установке, Страница: 43 / 91

6.43
Screen Output:
PRG>VMD AT 01
01:Voice Mail Dn--------------------------0
Input>>DN112
02:Voice Mail Dn--------------------------0
Input>>DN113
03:Voice Mail Dn--------------------------0
Input>>DN114
04:Voice Mail Dn--------------------------0
Input>>DN115
05:Voice Mail Dn--------------------------0|
Input>>$eod
D. When you have finished programming all KX-TVS100 extensions, type [$EOD] at the
Input>> prompt and press ENTER. This will take you back to the PRG> prompt.
Don’t exit the dumb terminal mode yet. You will need to use it for Step 4.
Step 4
Set the Follow-on ID sequence for every extension that will have a mailbox on the KX-TVS100. By
sending an extension’s Follow-on ID sequence to the KX-TVS100 port before connecting the caller,
the KX-T336 transfers unanswered calls directly to that extension’s voice mailbox. This operation is
often called Call Forward to Mailbox. Only extensions programmed as Voice Mail ports (see Step 3
above) can receive Follow-on ID.
A. From the dumb terminal mode PRG> prompt, type [MBN AT DNxxx]
(xxx = extension number).
Screen output:
PRG>MBN AT DN100
1: Mail Box Number-------------------#6100
Input>>
B. At the Input>> prompt, type the Follow-on ID sequence and press ENTER. We
recommend the Follow-on ID sequence #6xxx (xxx = mailbox number). The #6 forces the KX-
TVS100 into Voice Mail service regardless of port service setting (Automated Attendant, Custom
Service, Voice Mail)
C. To program the next extension, type [$EOD] at the Input>> prompt and press ENTER. Then
press the up arrow key (
↑
) to recall the previous MBN AT DNxxx command. Use the backspace
key to erase the previous extension number and enter the number of your next extension.