Panasonic KXTVS100 - VOICE MAIL SYSTEM, Быстрое руководство по установке

Страница: 23 / 91

6.23
The KX-TVS100 System comes from the factory already set up for a KX-TD1232 PBX. When the power is
turned on for the first time, the VPS will try to communicate with the KX-TD1232 through Digital Integration.
For this reason, several things should be done before starting up the KX-TVS100 for the first time.
PROGRAMMING INSTRUCTIONS—CONNECTING THE VPS WITH THE
PANASONIC KX-TD1232
KX-TD1232 S
OFTWARE
V
ERIFICATION AND
P
ROGRAMMING
FOR
D
IGITAL
I
NTEGRATION
V
IA THE
M
ANAGER
’
S
E
XTENSION
It is important that the KX-TD1232 have the proper software level to allow Digital Integration with the VPS.
Follow the procedures below to confirm the software level,
then complete the required programming before starting up the VPS.
NOTE: Two methods of programming are available on the KX-TD1232. The instructions below show how to
program without the operating and maintenance tool. For instructions on programming with the operating and
maintenance tool, please see page 3.9.
All of the following procedures must be done after entering system programming. Refer to the KX-
TD1232 Installation Manual for
instructions on how to enter the system programming mode.
Step 1
Check the software version of the KX-TD1232 by using PITS programming code 116, which shows the
software version number:
P 1 0 1 A 5 0 5 0 8 B
The underlined digits represent the software production date code (format YMMDD). In this example,
the date code is May 8, 1995 (year, month, day). For Digital Integration, the software production date
of the PBX must be March 31, 1995, or later.
If the software production date of the PBX is earlier
than this, call Panasonic Parts Center (MSC) about an upgrade: 1-800-833-9626.