6.14
CHAPTER 2
I
NSTALLATION
SAFETY PRECAUTIONS
Please read the following precautions before installing the VPS.
I
NSTALLATION
The VPS can be installed on the floor or on the wall. Improper placement of the system may result in
malfunction, noise, or discoloration. Avoid installing the VPS in the following places:
• in direct sunlight; in hot, cold, or humid places.
• in new areas where there are thermal springs, etc. (where sulfuric gas may
damage the equipment or contacts).
• where shocks or vibrations are frequent or strong.
• in dusty places or places where water or oil may come in contact with the unit.
• near high frequency generating devices such as sewing machines, elevators or
electric welders.
• on or near computers, telexes, or other office equipment; near microwave ovens or
air
conditioners. (Ideally, the VPS should not be in the room with these items and
should be at least 6
feet away from televisions.)
Do not obstruct the areas around the PBX and the VPS.
Both require space above for cooling and space
on the sides for maintenance and inspection.
W
IRING
• Do not wire the telephone cable parallel to an AC power source, computer, telex, etc. If cables are run
near those wires, shield the cables with metal tubing or use
shielded cables and ground the shields.
• Use protectors if running cables on the floor; avoid wiring under carpets.
• Avoid sharing a 120 V AC power supply for computers, telexes, and other office equipment with the
VPS. Induction noise from that equipment may interrupt the VPS operation.
When making any connections or removing the cover, be sure the power switch is turned off.
WALL MOUNTING
Содержание KXTVS100 - VOICE MAIL SYSTEM
Страница 12: ...6 12...
Страница 13: ...6 13...
Страница 72: ...6 72 Delayed Answer 0 60 sec 0 Specifies whether the port answers immediately or in delay...
Страница 77: ...6 77...