89
“Input-Tab”:
The Input-Tab allows addition of an artificial
delay to the source signal for ST2110 & SDI.
Default is “0” (no additional delay) and the
maximum is 12 frames.
“ST2110-Tab”:
The ST2110-Tab provides all required Video &
Audio settings regarding the ST2110 Standard.
Click the “ ” symbol (which will turn into a
green check mark) in order to activate the
“Video and/or Audio IP” and “Port” settings for
adjustments. When finished, press the keyboard
“Return” or “Enter” key, or click on the green
symbol to confirm and close.
Enabling or disabling the individual Audio Group-
1, and/or Audio Group-2 using the designated
check box .
Note:
When the Input type is set to “SDI,” the “ST2110” tab will disappear from the “More” selection.
However, when the Input type is set to “Stream” instead, the former “ST2110” tab will be replaced with
the “RTP” tab.
“RTP-Tab” (RTP):
Click the “ ” symbol (which will turn into a green
check mark) in order to set up the “IP” and
“Port” settings. When finished, press the
keyboard “Return” or “Enter” key, or click on the
green symbol to confirm and close.
“RTP-Tab” (SRT):
When Stream type is set to “SRT,” various
protocol specific adjustments need to be
addressed.
Mode = Server (Listener) or Client (Caller)
Enter a Key or passphrase = if applicable
Receive latency drop down
menu for selection
Enable or disable the
“Packet drop” selection
using the designated check
box .
Picture 3.3.9.2.15
Picture 3.3.9.2.16
Picture 3.3.9.2.17
Picture 3.3.9.2.18
