44
[User name]
Enter the user name (login name) to access the DDNS
server.
Number of characters for the user name:
1 - 32 char-
acters
[Password]
Enter the password to access the DDNS server.
Number of characters for the password:
0 - 32 char-
acters
[Access interval]
Select the interval to access the DDNS server to check
the IP address and the host name from the following.
1 min/10 min/30 min/1 hour/6 hours/24 hours
Default:
1 hour
Configure the settings relating to SNMP [SNMP]
Click the [SNMP] tab on the "Network setup" page. (
☞
page 41)
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by
connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
[Community name]
Enter the community name to be monitored.
Number of characters for the community name:
0 - 32 characters
Default:
(blank)
Important:
When using the SNMP function, it is necessary to
enter the community name. When no community
name is entered, the SNMP function will not work.
[Camera title]
Enter a camera title to be used to manage the camera
with the SNMP function.
Number of characters for the camera title:
0 - 32
characters
Default:
WV-NP1004
[Camera location]
Enter the name of the location where the camera is
installed.
Number of characters for the camera location:
0 - 32
characters
Default:
(blank)
[Contact (Destination address or phone number of
manager)]
Enter the mail address or the phone number of the
SNMP manager.
Number of characters for the destination address or
the phone number of manager:
0 - 255 characters
Default:
(blank)
