![background image](http://html.mh-extra.com/html/panasonic/i-pro-wv-np1004/i-pro-wv-np1004_network-operating-instructions_277508024.webp)
24
When "Full scan" is selected for "Scan mode", the
maximum refresh interval for JPEG will be 15 fps
and the frame rate of the analog output will be 1/2.
[Image capture size]
Select "Use" or "Not use" for the image capture size of
JPEG image according to the selected scan mode.
When "Full scan" is selected for the scan mode
1280 x 960/VGA/QVGA
When "Partial scan" is selected for the scan mode
960 x 720/VGA/QVGA
Default:
VGA
Note:
The parameters selected for "Image capture size" of
both the "Alarm image setup" section on the [Alarm]
tab and the "FTP periodic transmission" section on
the [FTP] tab will become unavailable (turns gray)
on this page.
[Initial display]
Select an image capture size for live images from the
following. Only the image capture size for which "Use" is
selected is available.
Default:
VGA
[Image quality]
Select image quality of JPEG images from the following.
0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 Low
Default:
5 Normal