Panasonic EYFR03, Руководство пользователя

Страница: 66 / 110

EYFR03 User Manual 66 of 110 v1.6.0
Chapter 5: Discrete I/O 20 January 2020
If a single parameter is running outside a group or job, this output will match the Tool #X Batch
output of the tool in the parameter. When running a group, this output will be triggered when all
parameters in the group are completed. If a group is in free run mode, this output will never be
triggered as the group is never considered completed. When running a job, this output will be
triggered when the last step in the job is completed.
This output is a momentary output. The duration this output will be active is determined by the
Batch Timeout qualifier setting. If the Batch Timeout is set to 0, this output will behave as a
latching output and will remain active until another tightening is performed or another operation
is started.
Binary representation of active operations
The binary outputs, Parameter Active (binary), Group Active (binary), and Job Active (binary),
allow you to select the number of outputs to use. The more outputs that are used, the more items
you can represent.
Number of Outputs Number of Items
1 1
2 3
3 7
4 15
5 31
6 63
7 100
The number of representable items is also the maximum item number representable for the
number of outputs. For example, with 3 outputs, you can only represent parameters 1-7, not any
combination of 7 parameters. If an item past the maximum number of items is active, the
outputs will show the low bits of the active item number’s binary representation.