Panasonic EYFR03, Руководство пользователя

Страница: 61 / 110

EYFR03 User Manual 61 of 110 v1.6.0
Chapter 5: Discrete I/O 20 January 2020
Stop Operation
Inputs used: 1
This input is used to stop the currently running operation when activated and put the unit into a
No Active Parameter state.
Control Inputs
Suspend Qualifier
Inputs used: 1
This input is used to suspend the qualifier. When this input is activated, all tools will be disabled
and no results will be accepted. While this input remains active, parameters, groups, or jobs can
be started, but the associated tools will not be enabled until this input is deactivated.
Suspend Tool #X
Inputs used: 1 per tool
This input is used to suspend an individual tool. When this input is activated, the associated tool
will be disabled and no results will be accepted.
This input is most useful when running a group in free run mode. Suspending individual tools
within a free run group allows running multiple tools simultaneously and independently while
still retaining the ability to disable a single tool.
Batch Reset
Inputs used: 1
This input is used to reset the batch of the running operation. If the current operation is a group,
the batch count for all parameters in the group will be reset. If the current operation is a job, the
batch count for the current step in the job will be reset. If the job was completed but not
automatically restarted, the whole job will be restarted.
Operation Reset
Inputs used: 1
This input is used to reset the running operation. This input is the same as Batch Reset, except
when running a job. When a job is running, activating this input will restart the entire job at the
first step, regardless of where the qualifier was in the job.
Clear VIN
Inputs used: 1
This input is used to clear the VIN from the qualifier. This input will clear the VIN regardless of
the source that initially provided it (bar code or Ethernet).
Clear ID Part 2
Inputs used: 1