Panasonic DP-MB500 series, Руководство по эксплуатации

Страница: 45 / 200

• When feeding certain types of document (for example, if back of the page is not clean) through the
automatic document feeder, it is possible that dirty marks may be left on the original document. To prevent
this, we recommend feeding the document one page at a time when using the automatic document feeder,
or to use the scanner glass.
• The total height of the documents when laid flat, must be less than 7 mm. If the documents exceed the
capacity of the automatic document feeder, they may fall or cause a jam in the feeder.
• To set a document with a width of less than 210 mm, we recommend using the scanner glass to copy the
original document onto A4 or letter-size paper, then setting the copied document for better results.
• Do not set documents that do not satisfy the requirements of size and weight. Make a copy of the
document using the scanner glass and set the copy.
• The number of sheets that can be held in the document exit may vary depending on the specifications of
the paper and the usage environment.
3.3.3 Document requirements
Effective scanning area
Effective scanning area is shown by the shaded area.
Scanner glass:
208 mm
348 mm 4 mm 4 mm
4 mm
4 mm
Automatic document feeder ( ):
216 mm
208 mm
4 mm 4 mm
4 mm
4 mm
• When using the unit as a scanner, the effective scanning length depends on the selected paper size.
Size and weight of the document (using the automatic document feeder) ( )
■ Document size
– Minimum document size
105 mm
105 mm
– Maximum document size
600 mm
216 mm
■ Document weight
• Single sheet: 60 g/m² to 80 g/m²
• Multiple sheets: 60 g/m² to 80 g/m²
3.3.3 Document requirements
Operating Instructions 45