2.
Getting Started/Basic Operations
68
•
Always reset the camera when disposing or selling it to prevent personal information saved
within the camera from being misused.
•
Always reset the camera after making a copy of personal information when sending the camera
in to be repaired.
•
Refer to
P220
for details.
•
Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
•
Turn the camera off and on after the pixels are corrected.
•
Dust Reduction Function will operate automatically when the camera is turned on, but you can
use this function when you see dust.
(P411)
•
Refer to
P58
for details.
[Reset Wi-Fi Settings]
Reset all settings in the [Wi-Fi] menu to factory default settings.
(Excluding [LUMIX CLUB]
(P290)
)
[System Frequency]
—
[Pixel Refresh]
It will perform optimization of imaging device and image
processing.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
[Format]
—